Sony HSR-X216 Mode D'emploi page 11

In OSD operations, your selection or setting will be
accepted when you turn the dial clockwise.
qd Jog dial (inner)
By rotating the Jog dial in Playback mode (PLAY
button indicator lit), you can gradually change the
playback speed. Clockwise rotation increases the
speed and counterclockwise rotation decreases it.
When you rotate the Jog dial in Still-Picture mode
(PAUSE button indicator lit), playback is performed
frame by frame. Clockwise rotation forwards the
frames and counterclockwise rotation reverses them.
For details on the operation, see "Variable-Speed
Playback" on page 46(GB).
In OSD operations, you can move the cursor on the
screen and select setting values using this dial.
qf ALARM indicator
Lights in red during pre-alarm recording and flashes in
red during alarm recording. It goes dark when
recording ends.
For alarm recording and pre-alarm recording, see "Alarm
Recording" on page 35(GB).
qg ALARM FULL indicator
Flashes in red if the remaining capacity of the alarm
recording area of the built-in hard disk drops below the
specified value (default: 1%), and steadily lights in red
if the remaining capacity becomes 0.
qh FULL indicator
Flashes in red if the remaining capacity of the normal
recording area of the built-in hard disk drops below the
specified value (default: 1%), and steadily lights in red
if the remaining capacity becomes 0.
qj INPUT SELECTOR buttons and indicators
When you press one of these buttons, the indicator on
that button lights, and the picture from the camera
connected to the corresponding camera input is
displayed on the monitor.
The indicator of the camera whose alarm is activated
flashes.
You can also use these buttons for entering values in
Menu Setting mode.
For details on menu operations, see "Menu Operations" on
page 15(GB).
qk ZOOM button and indicator (green)
The button permits you to zoom in on a part of the
camera input or playback image on the monitor screen.
Specify the part to be zoomed in using the Jog and
Shuttle dials.
While the zoom function is active, the indicator of the
ZOOM button lights. When you press the button
again, the normal size is restored.
For details on the operation, see "Zooming in on a detail of
a picture" on page 20(GB).
ql SEQUENCE (automatic switching) button and
indicator
When you press this button, the indicator begins to
flash, and the unit enters Automatic Switching mode.
In Full-Screen mode, pictures from cameras connected
to the camera connectors will be automatically
displayed one by one in sequence.
In 4-division mode, all 4 pictures on the screen will be
switched to the next 4 pictures at a time.
In Option mode, pictures of cameras will be displayed
one by one in sequence in the lower-right part (option
screen) of the screen.
The switching interval can be set by menu operation.
w; SEARCH button
When you press this button in a recording mode or in
stop status, the search operation display appears.
wa COPY button and indicator (green)
Press this button to copy the data to the archive area of
the built-in hard disk, a Memory Stick, or a DDS tape.
The indicator lights, and the copy-operation display
appears.
For details on the operation, see "Data Storage" on page
42(GB).
ws Menu reset button
Press this button to return the settings of the menu
items being displayed on the monitor to the factory-set
default settings.
wd PC card slot
By inserting a commercially available PC card
adaptor, copying of the recorded data to external
memory, such as Memory Sticks, will be enabled.
11
(GB)