Type 3004
Technical Data
7.4.
general Technical Data
7.4.1.
mechanical data
Dimensions:
Weight:
Housing material:
Actuating angle:
Duty cycle:
Manual emergency actuation:
Working modes:
See chapter 7.4.2.Dimensions
25 – 75 Nm; 4 kg
100 – 300 Nm; 6.5 kg
Cover and housing made of epoxy-coated aluminium
Axles and screws made of stainless steel
Gears made of galvanized steel
90° (optional 180°, 270°) ± 5°
50% at maximum torque (optionally 80%)
with open-end wrench on faces of the axle (up to 75 Nm);
by handwheel (from 100 Nm)
Open/Closed mode or Three points mode (see figure 16 and 17)
English
17