Burkert LCIE 07 ATEX 6078 X Instructions De Service page 26

9.2.2. multivolt or 24 V AC/DC standard version
The power supply voltage of the actuator is 24 V AC/DC or 100 – 240 V AC (120 – 350 V DC).
Always observe the specifications on the rating plate!
H
A B
Fig. 14: Power supply card for actuators with
25 – 150 Nm
no. Designation
a Screw for earthing
b Connections for control and power supply
C Fuse
D LED 1: Microprocessor OK
the rotary actuator can be connected and operated in two different modes:
1. Three points mode
2. Open / Closed mode
26
G F
C D E
English
Type 3004
Installation
H
A B
Fig. 15: Power supply card for 300 Nm actuators
no. Designation
E LED 2: Error message
f LED 3: Power on
g Connection for heating resistor
h Connection 24 V DC
G F
C D E