General Technical Data; Diameters Available; Dimensions - Burkert S039 Manuel D'utilisation

Fluid pressure
bar
11
10
9
8
7
6
5
4
3
2
1
0
-10 +10 +30
Fig. 1: Fluid pressure / temperature dependency curve
for fittings S039 used on their own
conformity to the pressure
directive
The S039 fitting complies with article 3 of §3 from 97/23/
CE directive.
Acc. to the 97/23/CE pressure directive, the device can
only be used in the following cases (depending on max.
pressure, pipe diameter and fluid):
English
12

diameters available

The diameters available depend on the design of the S039
fitting.
Refer to the graph on page 20 to determine the
appropriate DN of the pipe and fitting.
Connections of the S039 fitting
External threads, G or metric
External threads, G or NPT
Internal threads, G or NPT
materials
Paddle-wheel Axis
Sensor holder
Body
Fig. 2: Sectional drawing of the S039 fitting
Component Material
Seal FKM or EPDM
Body Brass (CuZn39Pb2)
English
14
A
PVDF (PN 10)
+50 +70 +90 +110 °C
Fluid temperature
DN available
DN06
DN08
DN15 to DN50
Seal
type of fluid conditions
Fluid group 1 § 1.3.a only DN ≤ 25
Fluid group 2 § 1.3.a DN ≤ 32
or DN > 32 and PNxDN ≤ 1000
Fluid group 1 § 1.3.b PNxDN ≤ 2000
Fluid group 2 § 1.3.b DN ≤ 200

General technical data

Max. Fluid viscosity 300 cSt
Type of fluid Clean, neutral or slightly aggressive
Rate of solid particles in max. 1 %
the fluid
Max. particle size 0,5 mm
Measurement range of 0,3 to 10 m/s
the flow rate in the pipe
Accuracy, with standard ± (1 % of the full scale* + 3 % of the
K factor measured value)
≤ ±
Linearity
±
Repeatability 0,4 % of the measured value*
* determined in the following reference conditions: medium =
water, water and ambient temperatures 20 °C, min. upstream and
downstream distances respected, appropriate pipe dimensions.
Component Material
Screws Stainless steel (316L - 1.4404)
Paddle-wheel PVDF
Shaft and bearings Ceramics (Al

dimensions

Table 1: Dimensions of the fittings with G or NPT
internal thread connections
DN P [mm] A [mm] D [inch]
[mm]
15 34,5 90,0 G 1/2 or NPT 1/2
20 32,0 94,0 G 3/4 or NPT 3/4
25 32,2 104,0 G 1 or NPT 1
32 35,8 119,0 G 1 1/4 or NPT 1 1/4
40 39,6 129,0 G 1 1/2 or NPT 1 1/2
50 45,7 148,5 G 2 or NPT 2
1 % of the full scale (10 m/s)*
English
O )
2 3
L [mm]
16,0
17,0
23,5
23,5
23,5
27,5
L
A
English
13 13
15 15