Burkert LCIE 07 ATEX 6078 X Instructions De Service page 39

Type 3004
Maintenance, Troubleshooting
malfunction
The valve does not fully open or close
The rotary actuator is jammed in the
CLOSED position
remedial action
→
Check the power supply.
→
Check the connections according to the supplied circuit
diagram.
→
Check the limit switches.
→
Check whether an overload has occurred due to excessively
high torque on the valve (our rotary actuators feature electronic
overload protection).
if yes: Interrupt the power supply for approx. 5 minutes.
→
Check the power supply.
→
Check the connections according to the supplied circuit
diagram.
→
Check whether the movement of the electric valve is obstructed.
English
39