Correct Use; Restrictions; Possible Errors In Use - Burkert LCIE 07 ATEX 6078 X Instructions De Service

Type 3004

Correct Use

3. CorrECT usE
Warning!
incorrect use of the electromotive rotary actuator can be dangerous to people, nearby equipment and the
environment.
• The rotary actuator can be used indoors, e.g. to actuate fittings, especially ball valves or shut-off flaps.
• During use observe the permitted data, the operating conditions and conditions of use specified in the con-
tract documents and operating instructions, as described in chapter 6.System Description.
• The device may be used only in conjunction with third-party devices and components recommended and
authorized by Bürkert (e.g. ATEX-approved components).
• Correct transportation, correct storage and installation and careful use and maintenance are essential for reli-
able and problem-free operation.
• Use the device only as intended.
3.1.

restrictions

If exporting the system/device, observe any existing restrictions.
3.2.

possible errors in use

• Do not put any loads on the housing (e.g. by placing objects on it or standing on it).
• Do not make any external modifications to the device housings.
• It is forbidden to open the housing for specific device designs in the explosion-protected area. Follow the safety
instructions on the rating plate.
• Do not install the actuator with the cover facing down (head first).
The electromotive rotary actuator Type 3004 was developed with due consideration given to the accepted
safety rules and is state-of-the-art. However, dangers can still arise.
Operate the device only when it is in perfect condition and in accordance with the operating instructions.
Failure to observe these instructions and unauthorized tampering with the device release us from any liability
and also invalidate the warranty covering the devices and accessories!
Do not paint the housing parts or screws.
English
7