General Safety Instructions - Burkert LCIE 07 ATEX 6078 X Instructions De Service

4.

gEnErAL sAfETy InsTruCTIons

These safety instructions do not make allowance for any:
• Contingencies and events which may arise during the installation, operation and maintenance of the devices.
• Local safety regulations; the operator is responsible for observing these regulations, also with reference to the
installation personnel.
DangEr!
risk of electric shock!
There is a serious risk of injury when reaching into the device.
• Before reaching into the device, always switch off the power supply and safeguard to prevent re-activation!
• Connect several electromotive rotary actuators always with phase separation via a switch.
• Protect the device with a mains-operated fuse.
• Observe applicable accident prevention and safety regulations for electrical equipment!
Danger of explosion!
For specific device designs there is a risk of explosion if the device is opened in the explosion-protected area.
• Follow the safety instructions on the rating plate!
Danger of explosion caused by electrostatic charge!
If there is a sudden discharge from electrostatically charged devices or persons, there is a danger of explosion in
the EX area.
• Take appropriate measures to prevent electrostatic charges in the EX area.
• Clean the device surface by wiping it gently with a damp cloth.
general hazardous situations.
to prevent injury, ensure:
• that the system cannot be activated unintentionally.
• Installation and repair work may be carried out by authorized technicians only and with the appropriate tools.
• After an interruption in the power supply or pneumatic supply, ensure that the process is restarted in a
defined or controlled manner.
• The device may be operated only when in perfect condition and in consideration of the operating instructions.
• The general rules of technology apply to application planning and operation of the device
8
English
Type 3004
General Safety Instructions
.