Installation Of Emergency Reset Into The Actuator Drive - Burkert LCIE 07 ATEX 6078 X Instructions De Service

Option: Rotary actuators with integrated
emergency reset
Description of lED status
lED
Green
Red
10.4. Installation of emergency reset into the actuator
drive
Fig. 27: Illustration: installation of emergency reset into the actuator drive
→
Fasten the safety block of the emergency current model onto the actuator drive with 4
(see illustration Fig. 27:).
→
Connect the battery in this order:
1. F+ (wire color red)
2. E- (wire color black)
→
Connect the power supply in this order:
1. terminal 18
2. terminal 17
(see Fig. 26: Illustration: Electronic printed circuit board).
Type 3004
status Description
lit Mains power operation
flashing Battery operation
lit Battery is charged
flashing Battery is charging
4 fastening screws ST2.2 x 6.5
English
35