Battery Operation; By-Pass Specifications; Reference Standards - LEGRAND Megaline Rack Mode D'emploi Pour L'utilisateur

5.7

Battery operation

Approximate autonomy in minutes
with charged batteries
Percentage of applied load
Standard UPS
Recharge time up to 90%
of total charge
Specifications and quantity
of batteries
Reserve signals
Minimum voltage for battery
operation during discharge
Average battery life
5.8

By-pass Specifications

Type of by-pass
Switchover time
5.9

Reference Standards

Safety:
Designed to satisfy standard
Electromagnetic compatibility:
• immunity
• emission
Typical performance
LEGRAND® reserves the right to vary data and specifications without notice.
3 103 38 3 103 39
50% 80% 100% 50% 80% 100% 50% 80% 100% 50% 80% 100%
20 11 8 20 11
5 - 6 hours according to level of discharge
n. 3 pcs 12V 9Ah, sealed, lead-acid, maintenance free batteries connected
in series for each power module
from 32.2 V to 36V, can be programmed by operator
from 27V to 31.5V with automatic selection depending on applied load,
or as programmed by operator.
3-6 years according to use and working temperature.
WARNING!
The batteries in the UPS are subject to a reduction in capacity
depending on their age (a feature of lead batteries declared by their
manufacturer in the technical manual). For example, the reduction
of capacity of a 4-year-old battery can be as much as 40%, resulting
in a proportional reduction of UPS autonomy time when running on
battery power.
3 103 38 3 103 39
Static and electromechanical
3 103 38 3 103 39
Conforms to standard EN 62040-1
Conforms to standard EN 62040-2
Conforms to standard EN 62040-3
Megaline Rack
3 103 40
8 20 11 8 20
3 103 40
zero
3 103 40
3 103 41
11 8
3 103 41
3 103 41
51