LEGRAND Megaline Rack Mode D'emploi Pour L'utilisateur page 41

Input
Power xxxx
Appar.Pow. xxxx
V RMS xxx
ð
I RMS xxxx
Peak Current x
Frequency x
I Crest factor x
Power Fact x
Batteries
Voltage xx
Residual Cap. xxxx
Discharge count xxxx
ð
Usage xxxx
Cal.dd/mm/yyhh:mm
Ext. KB units xx
Ext Chargers xx
History Data
UPS Ontime xxxxx
BoosterOnTime xxxx
ð
DrainedOut N. xxxx
Booster Int. xxxx
Bypass Interv. xxxx
OverheatCount xxxx
Misc.
ð
Int. Temp. xx
Ext. Temp. xx
Fan speed xx
Power
Indicates the power received from mains (W)
Appar.Pow.
Indicates the apparent power received from mains (VA)
Indicates the effective voltage (V RMS)
V RMS
at the UPS input
Indicates the effective current (A RMS)
I RMS
received from mains
Peak Current Indicates the peak current received from mains (A)
Frequency
Indicates the frequency of the UPS input voltage (Hz)
Indicates the crest factor, calculated as the ratio between
I Crest factor the peak value and the effective value of the current
received from mains
Power Fact Indicates the power factor applied to mains
Voltage
Indicates the voltage at the terminals of the battery kits (V)
Residual Cap.
Indicates the percentage of battery charge
Discharge count Indicates the number of battery discharge cycles
Usage Hours of operation on battery power
Cal.dd/mm/
Indicates the date (day / month / year) and the time
yyhh:mm
(hours / minutes) of the last battery calibration
Ext. KB units Indicates the number of external KBs fitted
Ext Chargers Indicates the number of external battery chargers fitted
Indicates the total number
UPS Ontime
of hours of UPS operation
Indicates the number of hours of UPS operation
BoosterOnTime
in booster mode (running on battery power)
Indicates the number of times the UPS has completely
DrainedOut N.
discharged its batteries.
Number of times booster mode has intervened
Booster Int.
(running on battery power)
Number of times the by-pass has intervened
Bypass Interv.
(refer to Config.UPS / By-pass menu)
Number of times the thermal protection has been
OverheatCount
triggered (due to excessive load, for example)
Indicates the internal temperature of the UPS,
Int. Temp.
shown in Celsius
Indicates the external temperature of the UPS,
Ext. Temp.
shown in Celsius
Indicates the speed of the UPS cooling fans,
Fan speed
shown in a percentage format (100% = maximum speed)
Megaline Rack
41