Surgical Leads Directions for Use
Tunneling the Lead or Lead Extension
Note: If using a 4x8 Surgical Lead, it is recommended to use the Long Tunneling Tool (35cm).
1. Attach the tunneling tool handle to the shaft by turning the locking mechanism clockwise.
Tool Handle
Locking Mechanism
Shaft
2. Mark the desired route of the tunnel.
3. Administer the appropriate local anesthetic along the tunneling path.
4. OPTIONAL. If necessary, bend the tool shaft to conform to the patient's body.
5. Make a small incision at the desired exit site.
Surgical Leads Directions for Use
90970892-17 Rev A 8 of 277