Parameters And Configuration Of The Blast Chiller; Advices And Instructions; Advices - Techfrost E Série Manuel D'utilisation

• Press and release the UP key or the DOWN key within 15 s to plan "149".
• Press and release the BLAST CHILLING key or do not operate for 15 s: the display will visualize
"- - - - " flashing for 4 s and the LED HACCP will turn off, then the device will automatically
go out of the procedure and the display will visualize the suitable size in the paragraph "the
display."
If the device has not memorized any information about the HACCP alarms, the label "rLS" won't be
visualized.

9.4 Parameters and configuration of the blast chiller

The machine is sold with the settings of the manufacturer Techfrost. If it is
necessary to change the parameters or the factory settings, ask the dealer for
the parameter configuration manual and the corresponding access password.

10 ADVICES AND INSTRUCTIONS

10.1 Advices

The following chart illustrates the meaning of the LED signs.
LED
HARD
www.techfrost.com
Blast chilling LED
If it's on:
-a blast chilling cycle is running
If it's flashing:
-a blast chilling and conservation cycle is running
Blast freezing LED
If it's on:
-a soft blast freezing cycle is running
If it's flashing:
-a soft blast freezing and conservation cycle is running
Hard blast chilling/freezing LED
If it's on:
-an hard blast chilling or freezing cycle is running
If it's flashing:
-a hard blast chilling and conservation cycle or a blast freezing and conser-
vation cycle is running
Temperature Blast chilling/temperature blast freezing LED
If it's on:
-a temperature blast chilling and conservation cycle or a temperature blast
freezing and conservation cycle is running
-a temperature blast chilling or a temperature blast freezing is running
If it's flashing:
-the correct core probe insertion test has not been completed correctly
-the core probe warm up is running
Meaning
45