Alarms Haccp Informations Display; Cancellation Of Haccp Alarms Informations - Techfrost E Série Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

9.2 Alarms HACCP informations display

Please operate in the following way:
Please make sure that keyboard is not jammed and that some procedure is not in progress.
Please keep the DOWN key pressed for 1 s: the display will visualize the first available label.
Please press and release the UP key or the DOWN key to select "LS."
Please press and release the BLAST CHILLING key: the display will visualize the code of the
most recent alarm.
To visualize the information related to an alarm HACCP please operate in the following way:
Please press and release the UP key or the DOWN key to select an alarm code, for example
"AH3."
Please press and release the BLAST CHILLING key: the LED HACCP will stop flashing to remain
permanently turned on and the display will visualize, for example, the following informations
in sequence:
Informaz.
8.0
StA
y11
n03
d26
h16
n30
dur
h01
n15
AH3
The display visualizes every information for 1 s. To abandon the succession of information please
operate in the following way:
Please press and release the START/STOP key: the display will again visualize the code of se-
lected alarm.
To go out of the procedure please operate in the following way:
Please abandon the succession of information.
Please press and to release the UP key or the DOWN key until the display visualizes the suitable
greatness "the display" or do not operate for 60 s.

9.3 Cancellation of HACCP alarms informations

Please operate in the following way:
Please make sure that the keyboard is not jammed and that some procedure is not in progress.
Please keep the DOWN key pressed for 1 s: the display will visualize the first available label.
Press and release the UP key or the DOWN key to select "rLS".
Press and release the BLAST CHILLING key: the display will visualize "0".
44
Significato
il valore critico è di 8.0 °C / 8 °F
il display sta per visualizzare la data e l'ora in cui l'allarme si è manifestato
l'allarme si è manifestato nel 2011 (continua...)
l'allarme si è manifestato nel mese di marzo (continua...)
l'allarme si è manifestato il 26 marzo 2011
l'allarme si è manifestato alle 16 (continua...)
l'allarme si è manifestato alle 16 e 30
il display sta per visualizzare la durata dell'allarme
l'allarme è durato 1 h (continua...)
l'allarme è durato 1 h e 15 min
il codice di allarme selezionato
www.techfrost.com

Hide quick links:

Publicité

Table des Matières
loading

Table des Matières