Measuring Start-Up; Locking The Enter Key; Replacement Of Batteries - Burkert 8035 Manuel D'utilisation

Masquer les pouces Voir aussi pour 8035:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3 INSTALLATION

3.3 Measuring start-up

Remove the cover and put the switch
in position "ON" (see fig. 4).

3.4 Locking the ENTER key

The ENTER key can be locked to prevent
access to the calibration menu,
especially the reset of totalizers. Remove
the cover and put the switch
position 'ENTER locked" (see fig.4).

3.5 Replacement of batteries

Remove the cover. Insert new batteries by
changing one after the other and
reassemble the totalizer.
Warning!: To keep the totalized amounts
and the calibration data, change the
batteries one at a time, as soon as blinking
occurs and, before the "LOW BATT" message
appears.
Switch
in
Fig. 4 Totalizer SE35 switches
Fig. 5 Totalizer power supply plate
E-8-
FLOW TOTALIZER 8035
Switch
ENTER Locked
ENTER Unlocked

Publicité

Table des Matières
loading

Table des Matières