Installation; Installation Guidelines; Process Mounting - Burkert 8035 Manuel D'utilisation

3 INSTALLATION

3.1 Installation Guidelines

Observe pressure-temperature dependence according to the respective fitting materials.
P medium (bar)
Application range
16
15
14
13
PVC + PP
12
11
10
9
PVDF
8
7
6
5
4
PVC (PN10)
3
2
1
0
-10 +10 +30
The flow sensor is not designed for gas flow measurement.
The device must be protected from constant heat radiation and other environmental
influences, such as direct exposure to sunlight.

3.2 Process mounting

The flow sensor electronic SE35 INLINE can be easily installed in pipes using the specially
designed fitting system S030.
1. The S030 fitting
the pipe according to the installation
specifications in section 3.1 and those
described within the instruction manual
of the fitting.
2. Fasten the electronic housing
fitting using the bayonet connection, and
turn by 30°.
3. Tighten the electronic housing with the
screw .
Fig. 3 Flow totalizer 8035 INLINE mounting diagram
Metal (PN16)
PVDF (PN10)
PP (PN10)
+50 +70 +90 +110 +130
must be installed into
to the
FLOW TOTALIZER 8035
Fig. 2. Pressure-Temperature-Diagram
T medium (°C)
E-7-