Electrical Connection; Start-Up; Safety Instructions - Burkert PTB 07 ATEX 2063 X Mode D'emploi

7.3. Electrical connection

DANGER!
Risk of electric shock!
There is a serious risk of injury when reaching into the equipment.
• Only trained electrical engineers may work on the electrical
system.
• Before starting work, always switch off the power supply and
safeguard to prevent re-activation!
• Observe applicable accident prevention and safety regulations
for electrical equipment!
→
Connect the power
→
Always connect protective conductor!
The connection cable is encapsulated with the coil AC19
and cannot be removed.
14
english
07 ATEX 2063 X

Start-Up

8. START-UP

8.1. Safety Instructions

WARNING!
Danger due to improper operation!
Improper operation may result in injuries as well as damage to the
device and the area around it.
• Before start-up, ensure that the operating personnel are familiar
with and completely understand the contents of the operating
instructions.
• In particular observe the safety instructions and intended use.
• The device/the equipment may be started by adequately trained
personnel only.
Before start-up, ensure that
→
the device has been installed according to the instructions,
→
the connection has been made properly,
→
the device is not damaged.