1 INTRODUCTION
Dear Customer,
Before installing or mounting this
device, please take our advice and
read the entire manual thoroughly.
This will enable you to fully profit from all of
the advantages offered by this product.
1.1 Unpacking and Control
Please verify that the product is complete
and free from any damage.
Compare the type specification on the
label to the following: 423921.
If there is any loss or damage, please
contact your local Bürkert subsidiary.
1.2 About this Manual
This manual does not contain any warranty
statement. Please refer to our general
terms of sale and delivery.
Only properly-trained staff should install
and/or repair this product. If difficulties
should occur at the time of installation,
please contact your nearest Bürkert sales
office for assistance.
FLOW TOTALIZER 8035
1.3 User's Responsibility for Safety
Bürkert manufactures a broad range of flow
sensors. While each of these products is
designed to operate in a wide variety of
applications, it is the user's responsibility to
select a totalizer model that is appropriate
for the application, install it properly, and
maintain all components. Special attention
must be paid to the chemical resistance of
the totalizer against the fluids which are
directly contacting the product.
This symbol appears in the
manual to call special attention
to instructions that affect the
safe installation, function and
use of the product.
1.4 Electromagnetic compatibility
This device conforms to the EMC-Directive
of the European Union 89/336/EEC.
E-2-