Start-Up; Deinstallation - Burkert 2000 Mode D'emploi

7

START-UP

DANGER!
For control function I: Danger due to the control pressure fail-
ing.
If the control pressure fails, the valve remains in an undefined
position.
▶ For a controlled restart, pressurize the device with control
pressure and then connect the medium.
WARNING!
Risk of injury from high pressure or hot medium.
Excessively high pressure or temperatures may damage the
device and cause leaks.
▶ Observe values for pressure and medium temperature indic-
ated on the type label.
In the case of devices with control unit, observe start-up in
the operating instructions for the corresponding control
unit.
Adjust pilot pressure in accordance with information on type
label and in technical data.
18 english
Type 2000
Start-up
8

DEINSTALLATION

DANGER!
Risk of injury from high pressure and discharge of medium.
▶ Before working on the device or system, switch off the pres-
sure. Vent or drain lines.
Loosen pneumatic connection.
Disassemble the device.