Machine Description; Operation Capabilities; Conventions; Description - Nilfisk RS 2200 Manuel D'utilisation

MACHINE DESCRIPTION

OPERATION CAPABILITIES

This sweeper has been designed and built to be used by a qualifi ed operator to clean (by sweeping and suctioning) roads, smooth
and solid fl oors, in civil and industrial environments, and to collect dust and light debris under safe operation conditions.

CONVENTIONS

Forward, backward, front, rear, left or right are intended with reference to the operator's position, while on the driver's seat (15, Fig.
E).

DESCRIPTION

Description of standard control panel
(See Fig. D)
1. Armrest mounting knob
2. Throttle lever
3. Parking brake
4. Brake pedal
5. Accelerator pedal
6. Ignition key
7. Speaker prefi tting
8. Left/right broom dust control system nozzle valve
9. 3rd broom dust control system nozzle valve
10. Suction inlet dust control system nozzle valve
11. Forward/reverse gear selector
12. Cigarette lighter
13. Audio unit housing (prefi tting)
14. Ceiling light
15. Joystick safety lever
16. Electrical panel (*)
17. Safety belts
18. Brake fl uid tank
19. Joystick
20. Steering column
21. Hazard warning light switch
22. Combination switch (**)
23. Cab air fl ow control knob
24. Climate control system activation and temperature control
knob
25. Heating temperature control knob
26. Driver's seat
27. Passenger's folding seat
28. Seat horizontal position control lever
29. Seat springing control knob
30. Seatback control lever
31. Broom lowering/widening switch
32. Pocket
33. Tool box
34. Identifi cation plate
35. Seat height control lever
36. Vent
37. Armrest
38. Skirt opening push-button
39. Skirt closing push-button
40. 3rd broom arm left shifting push-button
41. 3rd broom arm right shifting push-button
42. 3rd broom arm extension lowering push-button
43. 3rd broom arm extension lifting push-button
44. 3rd broom tilting push-button +
45. 3rd broom tilting push-button -
46. 3rd broom rotation direction selector
USER MANUAL
Description of standard control panel
(See Fig. E)
1. Turn signal indicator light
2. Hydraulic system oil high temperature, clogged hydraulic
system oil fi lter and hydraulic system fault warning light
3. Parking brake warning light
4. Engine oil pressure warning light
5. Clogged air fi lter warning light
6. High beam indicator light
7. Engine glow plug pre-heating warning light
8. Lifted hopper warning light
9. Battery warning light
10. Running light indicator light
11. Water-in-fuel warning light
12. Engine speed adjustment potentiometer (working mode)
13. Broom speed adjustment potentiometer (working mode)
14. Sun visor
15. Steering wheel
16. Cab rear working light/suction inlet working light switch
17. Running light/low beam switch
18. Dashboard
19. Emergency push-button
20. Steering wheel position locking lever
21. Speed change switch (only for machines with speed
change system)
22. Hopper dumping/return switch
23. Display scroll button
24. Hopper lifting switch
25. Front working light switch
26. Check engine warning light [it can turn into different
colours (red, fl ashing red or orange) depending on the
fault].
27. Front leaf spring height control switch
28. Water pump switch
29. Suction fan, broom rotation and suction inlet/broom
lowering switch
30. Suction fan switch
31. Hydraulic system enabling switch
32. Display (***)
(*) See the electrical panel components below.
(**) See the combination switch functions below.
(***) See the display functions below.
RS 2200 33019476(3)2010-02 A
ENGLISH
7