Maintenance; Accessories; Technical Data - Truma MonoControl CS Mode D'emploi

Maintenance

The MonoControl CS gas pressure regulation system is
maintenance-free.
In Germany, the gas system must be retested every 2 years by
a liquid gas specialist (DVFG, TÜV, DEKRA). The test must be
confirmed on the respective test certificate (G 607).
In countries where testing is not mandatory, we recommend
that the gas system is tested every 2 years for your own safety.
Pressure regulation devices and hoses must be replaced with
new ones no more than 10 years after their date of manu-
facture (every 8 years if used commercially). The operator is
responsible for this.

Accessories

EisEx regulator heating
(part no. 53101-01)
Gas remote switch
for turning off the gas supply from inside the vehicle
GS 8 (part no. 57014-01)
GS 10 (part no. 57024-01)
Straight reducer Z 10 / RVS 8
(part no. 50020-04000)
MUV changeover valve
MUV 8 for 8 mm gas pipe
MUV 10 for 10 mm gas pipe
14
(part no. 25131-01)
(part no. 25141-01)

Technical data

(determined in accordance with EN 16129:2013 or Truma test
conditions)
Type of gas
Liquid gas (propane / butane)
Admission pressure
0.3 – 16 bar
Output pressure
30 mbar
Regulator capacity
1.5 kg/h
Regulator inlet
Union nut W 21.8 x 1/14 LH (G.5)
Regulator outlet
30 mbar 10 mm (H.9)
Horizontal triggering value
3.5 g ±0.5 g
Operating temperature
-20 °C to +50 °C
Product ID number
CE-0085BQ0102
DG approval number: 3894
Subject to technical changes.