Maintenance; Accessories; Technical Data - Truma MonoControl CS Gastank Mode D'emploi

Maintenance

The MonoControl CS gas pressure regulation system is
maintenance-free.
In Germany, the gas system must be retested every 2 years by
a liquid gas specialist (DVFG, TÜV, DEKRA). The test must be
confirmed on the respective test certificate (G 607).
In countries where testing is not mandatory, we recommend
that the gas system is tested every 2 years for your own safety.
Pressure regulation devices and hoses must be replaced with
new ones no more than 10 years after their date of manu-
facture (every 8 years if used commercially). The operator is
responsible for this.

Accessories

EisEx regulator heating
(part no. 53101-01)
Gas remote switch
for turning off the gas supply from inside the vehicle
GS 8 (part no. 57013-01)
GS 10 (part no. 57023-01)
Straight reducer Z 10 / RVS 8
(part no. 50020-04000)
MUV changeover valve
MUV 8 for 8 mm gas pipe
MUV 10 for 10 mm gas pipe
(part no. 25131-01)
(part no. 25141-01)

Technical data

(determined in accordance with EN 16129:2013 or Truma test
conditions)
Type of gas
Liquid gas (propane / butane)
Admission pressure
0.3 – 16 bar
Output pressure
30 mbar or 50 mbar, depending on variant
Regulator capacity
1.5 kg/h
Regulator inlet
Union nut W 21.8 x 1/14 LH (G.5)
Regulator outlet
Olive screw connection 50 mbar 8 mm or 30 mbar 10 mm
(H.9)
Horizontal triggering value
3.5 g ±0.5 g
Operating temperature
-30 °C to +50 °C
Declaration of conformity
The Truma MonoControl CS gas pressure regulation system
complies with the pressure equipment directive 2014/68/EU,
with the application of EN 16129:2013 and conforms to the
UN ECE R122 Appendix VIII "Safety regulations for combus-
tion equipment and heating systems for liquid gas (LPG)".
Complies with the directive UN ECE R10 "Radio interference
suppression in vehicles" and has the type approval number:
E1 04 4352
Product ID number
CE-0085BQ0102
DG approval number: 3894
Subject to technical changes.
13