Corghi MONSTER AGTT Manuel D'utilisation page 54

Then lock the turntable, selecting as the locking point the area that is as inward
as possible depending on the form of the rim�
DANGER
In view of the size and weight of tyres for earthmoving machines, and to ensure safe
operating conditions, a second person must be available to keep the wheel in a verti-
cal position.
A fork-lift truck or a crane should be used when handling wheels weighing more than
500 kg.
Do not leave the wheel locked on the turntable for periods longer than the normal
operating pauses.
DANGER
When working with wheels with a diameter greater than 1500 mm, or with a weight
higher than 200 kg, during the phase of loading-locking the wheel on the turntable,
it is mandatory that you work in safe conditions, following the instructions provided
below:
- Tip the tool-holder arm backward�
- Install the wheel anti-tipping guard (A, Fig� 22) in its housing�
- Place the wheel in a vertical position (Fig� 22) so that its external side is next to the
guard�
- Activate the turntable in the best way for locking the wheel�
- Remove the guard and then proceed with the mounting and demounting operations�
N�B� The same safety procedure must be used during the wheel loading and unloading
phase�
WARNING
When working with wheels that weigh more than 300 Kg it is recommended to use
only the first rotational speed of the turntable. This protects the reducer from damage
and extends its duration.
54 Operator's manual MONSTER AGTT