Set Slave Mode; Setting Partial Light Output Correction - Metz mecablitz 64 AF-1 digital Mode D'emploi

10.3.3 Set slave mode

TTLr Ch
REMOTE
SLAVE 2
• Press the sensor button on the touch
M-
display for the partial light output/
Zoom 35
m
m
exposure correction (e.g.
The window for the selection appears.
SLAVE
• Press the sensor buttons on the touch
CHANNEL
display for the channel
MODE
MODE
• Press the sensor button on the touch
display for the desired mode of operation
TTL
TTL or
M
M Ch
REMOTE
SLAVE 2
M-
Zoom 35
m
The setting is applied automatically.
m
P
1/1
TTL I CH1
).
MODE
.
M .

10.3.4 Setting partial light output correction

M Ch
REMOTE
• Press the sensor button
SLAVE 2
output on the touch display as many times
M-
as it takes for the partial light output
Zoom 35 display to appear.
m
m
P
1/1
P
• Press sensor buttons
1/8 - 2/3 touch display and set the desired partial
light output to 1/1, 1/2, 1/8 to 1/256 .
1/16
• Press the sensor button on the touch
1/16 - 1/3
display for the selected partial light output
p 1/16
q (e.g. 1/16).
The partial light output is adopted.
Once the slave flash units have achieved
flash-readiness, the AF measurement flash
flashes.
P for partial light
on the
k
189