Metz mecablitz 64 AF-1 digital Mode D'emploi page 1127

• After a series of flashes with full power and
short intervals, a pause of at least 3 minu-
tes must be observed after each series of
20 flashes! !
• When taking a series of flash shots at full
light output and with rapid recycling times,
and with zoom positions of 35 mm and
less, the diffuser heats up, due to the high
level of thermal energy.
• This flash unit may be used in combination
with a camera-integrated flash only if the
flash can be folded out completely.
2 Dedicated flash functions
Dedicated flash functions are flash functions
that have been specially adapted to a given
camera system. Depending on the type of
camera, different flash functions are supported.
• Flash-ready indication in camera viewfin-
der/camera display
• Correct exposure indicator in camera
viewfinder /camera display
• Automatic flash sync speed control
• Flash bracketing „FB"
• Automatic flash / triggering control
• Contrast control
• Spot beam mode „SB"
• P-TTL flash mode
• Automatic P-TTL-fill-in flash control
• 1st or 2nd curtain synchronisation (REAR).
• High-speed synchronisation (high speed
flash operation) P-TTL-HSS
• Automatic motor zoom control
• Extended zoom mode
• AF measuring beam control
• Automatic flash range indication
• Programmed auto flash mode
• Preflash function for reducing
the red-eye effect
• Wireless remote flash operation as master
• Wireless remote flash operation as
controller
• Wireless remote flash operation as slave
flash unit
k
165