Automatic Ttl Fill-In Flash Mode; Manual Flash Mode - Metz mecablitz 64 AF-1 digital Mode D'emploi

Masquer les pouces Voir aussi pour mecablitz 64 AF-1 digital:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 382

7.2 Automatic TTL Fill-in flash mode

The automatic TTL fill-in flash mode is acti-
vated by most cameras when the automatic
programme P is selected and by Vari or sub-
ject programmes during daylight (see camera
operating manual).
Fill-in flash mode overcomes troublesome
shadows and produces a more balanced
exposure between subject and background
with contre-jour shots. The camera's compu-
ter-controlled metering system sets the most
suitable combination of shutter speed, aper-
ture and flash output.
Ensure that the contre-jour light source does
not shine directly into the lens, as this will
interfere with the camera's TTL metering
system!
There is no setting or display for automatic
TTL fill-in flash in the flash unit.

7.3 Manual flash mode

In the manual flash mode M, the flash unit
emits the full uncontrolled amount of light if
no partial light output has been selected. The
specific photographic situation can be taken
into account by adjusting the aperture set-
ting or by selecting a suitable manual partial
light setting.
The setting area ranges from P 1/1 to P1/256
M
in
mode and P1/1 - 1/64 in
mode.
The display shows the distance at which the
subject is correctly lit (see 5.2).
TTL
0.8 - 9.0 m
M-
5,6
35
m
Zoom
F
m
EV
TTL
0.8 - 9.0 m
M-
5,6
35
m
Zoom
F
m
EV
MODE
A
M
STROBO
p
q
M
9.0 m
M FP
M-
35
m
Zoom
m
P
1/1
Setting the mode of operation
• Switch on the flash unit with the
button.
The start screen appears. Thereafter, the
flash unit always switches on with the
mode of operation that was used last .
• Press the sensor button of the displayed
mode of operation on the touch display as
many times as it takes for the display for
selecting the mode of operation to appear.
• Press the
sensor buttons on the
M
touch display and select
.
M
• Press the
sensor button on the touch
display.
• Set a suitable mode of operation on the
M
camera, e.g.
.
• Tap the shutter release to transfer data bet-
ween the flash unit and the camera.
Various cameras support manual flash mode
M only in the camera's M mode (manual).
In other camera models, an error message
appears in the display and the release is
locked.
k
159

Publicité

Table des Matières
loading

Table des Matières