Metz mecablitz 64 AF-1 digital Mode D'emploi page 1156

Setting procedure
• Press the
for the selection menu to appear.
• Press the
OPTION
touch display.
OPTION
• Press the
touch display and select
SYNC
RAPID
p
q
SYNC
• Press the
touch display.
1. Curtain
The setting is adopted immediately.
2. Curtain
After activation of the 2.Curtain function,
CONTR.CTRL.
„2.Curtain" appears in the display.
k
If high-speed synchronisation (HSS, see 7.4)
is set on the flash unit and the synchronisati-
on is set to the 2nd curtain, then high-speed
synchronisation (HSS) is deactivated.
194
button as often as it takes
OPTION
sensor button on the
sensor button on the
SYNC
.
2.Curtain
sensor button on the
11.2 Contrast control (CONTR.CTRL.)
To facilitate subject and pictorial composi-
tion, the camera flash can be combined with
an external flash unit (mecablitz) to perform
so-called contrast control when in P-TTL flash
mode. Here the camera flash provides 1/3 of
the required flash power and the external
flash unit provides the remaining 2/3.
Please observe the maximum possible flash
range (guide number) of both flash units to
ensure the correct operation of the contrast
control!
The benefits of contrast control can, however,
only be optimally exploited if the external
flash unit is set up at a reasonable distance
from the built-in camera flash.
To do so, the following original Pentax acces-
sories are available:
The "sync cable F 5P", combined with the
"adapter foot F" (to hold the external flash
unit) and "adapter foot FG" (for the connec-
tion to the camera). In this context, please
read the notes in the camera's operating
instructions.
The auto-focus measuring beam in the meca-
blitz cannot be used in the contrast control
mode.