Metz mecablitz 64 AF-1 digital Mode D'emploi page 1165

11.13 Connecting a power pack
(accessory)
A power pack (accessory) can be connected
to the flash unit using port
You need a connection cable (special acces-
sory) to connect the power pack.
The power pack extends the operating time
of the flash unit and provides faster flash
recycling times.
Setting procedure
• Press the
for the selection menu to appear.
• Press the
OPTION
touch display.
OPTION
• Press the
m/ft
touch display and select
POWERPACK
AF BEAM
• Press the
touch display.
p
q
POWERPACK
• On the touch display, press the
sensor button for a very fast recycling time
or the
time.
The setting is adopted immediately.
.
button as often as it takes
OPTION
sensor button on the
sensor buttons on the
POWERPACK
.
POWERPACK
sensor button on the
sensor button for a fast recycling
12 Favorite programme
In flash photography there are always recur-
ring standard situations (e.g. birthday cele-
brations at home, etc.). The ecablitz permits
the settings for such standard situations to
be stored as a favorite programme so that the
selected flash parameters can be instantly
reset.
The flash unit has 4 memory locations for
saving the settings made on the flash unit.
Procedure for saving a favourite programme
• Set the flash unit parameters.
• Press the
for the selection menu to appear.
• Press the
display.
• Press the
touch display.
F1 F2
F3 F4 • Press the
the touch display.
SAVE LOAD
The settings are saved to the selected memo-
ry location.
button as often as it takes
sensor button on the touch
SAVE
sensor button on the
F1 F4
. . . sensor button on
203
k