10.1.2 Setting the exposure correction (EV)
REMOTE
MASTER
• Press the
M-
display.
Zoom 35
m
m
EV
EV
• Press the
2/3
touch display and set the desired exposure
correction (e.g. +1).
1
• Press the sensor button for the desired
1 1/3
exposure correction value
p
q
The setting is adopted immediately.
k
10.1.3 Remote channel settings
There are four independent remote channels
to use so that multiple remote systems in the
same room do not interfere with one another.
Master and Slave flash units belonging to the
same remote system must be set to the same
remote channel.
186
on the master flash unit
EV
sensor button on the touch
sensor buttons on the
+1
.
• Press the
for the selection menu to appear.
• Press the
PARAMETER
touch display.
PARAMETER
• Press the
touch display.
ZOOM
RATIO
CHANNEL
CHANNEL
• Press the
CHANNEL 1
touch display and select a remote channel,
CHANNEL 2
CHANNEL 2
e.g
CHANNEL 3
• Press the sensor button on the touch
display for the desired channel.
p
q
The setting will take effect immediately.
Press
i
button as often as it takes
PARAMETER
sensor button on the
CHANNEL
sensor button on the
sensor buttons on the
.
and check the channel setting.