Metz mecablitz 64 AF-1 digital Mode D'emploi page 1472

10.1.4 Defining the lighting conditions
The lighting conditions of the remote system
can be set to achieve particular lighting
effects. The lighting conditions for the master
(CTRL) and the groups (RMT, RMT2) are con-
trolled exclusively via the master flash unit.
Ratio activate / deactivate
• Press the
for the selection menu to appear.
• Press the
touch display.
PARAMETER
PARAMETER
• Press the
touch display and select
CHANNEL
• Press the
RATIO
display.
k
CONTROL
p
q
RATIO
• Press the
OFF the touch display and switch the RATIO
function on or off.
ON
184
(RATIO) for the flash groups on the
master flash unit
button as often as it takes
PARAMETER sensor button on the
sensor buttons on the
RATIO
.
RATIO
sensor button on the touch
ON OFF
or sensor button on
Defining the lighting conditions (RATIO
M
REMOTE
CTRL+ 1/8
• Press the
touch display.
CTRL RMT RMT2
4 8 1
RATIO
RATIO
• Press the sensor button on the touch
CTRL 4
display for which a lighting condition is to
be set, in the example RMT2.
8
RMT
1
RMT2
RTM2
• Press the sensor buttons
touch display set the desired lighting con-
4
dition or switch off the lighting contribution
8
(--).
16
• Press the sensor buttons on the touch
display for the desired correction value.
p
q
M
REMOTE
1/8
CTRL+
CTRL RMT RMT2
The setting is applied immediately.
4 8 8
RATIO
RATIO sensor button on the
on the