Metz mecablitz 64 AF-1 digital Mode D'emploi page 1479

Setting procedure for the learn function
The AF pre-flash function of the camera must
be switched off.
SYNC
M-Servo • Press the
touch display as many times as it takes for
the selection to appear.
M-
Zoom 24
m
m
P
1/16
SYNC
• Press the
display.
• "Learning Mode" is ready to learn.
LEARN
• Press the release button on the camera so
that the camera's own flash unit is
activated.
If the SERVO flash unit has received a light
pulse, then "LEARN OK" appears in the
display as confirmation.
The macablitz digital has learned the flash of
the camera flash unit.
SYNC
sensor buttons on the
Learn
sensor button on the touch
10.4.5 Switching-off SERVO flash mode
• Press the displayed mode of operation on
SYNC
M-Servo
the touch display as many times as it takes
for the display for selecting the mode of
M-
operation to appear.
Zoom 24
m
m
P
1/16
• Press the
MODE
touch display and select the desired mode
of operation, e.g
TTL
• Press the sensor button on the touch
display for the mode of operation, e.g
A
p
q
TTL
0.6- 7.5 m The selected mode of operation is adopted.
M-
24 m
Zoom
m
EV
sensor buttons on the
TTL
.
TTL
.
k
191