Synchronisation On The Second Curtain - Metz mecablitz 64 AF-1 digital Mode D'emploi

10.5.5 Switching-off SERVO flash mode
SYNC
M-Servo
• Press the displayed mode of operation on
the touch display as many times as it takes
M-
for the display for selecting the mode of
Zoom 35
m
operation to appear.
m
P
1/16
MODE
• Press the
touch display and select the desired mode
of operation, e.g
PTTL
A
• Press the sensor button on the touch
p
q
display for the mode of operation, e.g
PTTL
The selected mode of operation is adopted.
0.8- 9.0 m
M-
5,6
35 m
Zoom F
m
EV
sensor buttons on the
PTTL
.
PTTL
.
11 OPTION menu
11.1 Synchronisation on the
second curtain
Some cameras offer the option of second-
curtain synchronisation, in which the flash
unit is not triggered until the end of the expo-
sure time.
This is particularly advantageous when used
with lower shutter speeds (slower than 1/30
sec.) and moving subjects that have their
own source of light. With second-curtain syn-
chronisation, a moving light source will trail a
light streak instead of building one up ahead
itself, as it does when the flash is synchroni-
sed with the first shutter curtain. In this way
a „more natural" image of the photographic
situation is produced!
Depending on its operating mode, the came-
ra sets shutter speeds slower than its sync
speed.
On some cameras the 2.Curtain function is
not possible in certain operating modes (e.g.,
certain vari- or subject programs, or with red
eye reduction). In these cases, the 2.Curtain
mode cannot be selected and/or is automati-
cally cancelled or ignored (see camera's ope-
rating instructions).
k
193