Boston Scientific Precision SCS Mode D'emploi page 7

Kit d'essai destiné aux médecins du système de stimulation médullaire
Table des Matières

Publicité

Pulse Width (If provided by physician)
1. Press and hold
from the Level screen to
"
activate the Pulse Width Area 1 screen.
2. Press
(normal press) as necessary to
"
cycle to the area you want to adjust, then
press p or q to increase or decrease
the Pulse Width.
3. From any Pulse Width screen, press and
hold
again to access the Rate 1 screen.
"
Rate (If provided by physician)
1. From the Pulse Width screen press and
hold
to access the Rate Area 1 screen.
"
2. Press
(normal press) as necessary to
"
cycle to the desired area.
3. Press p or q to increase or decrease
Rate.
Saving Rate or Pulse Width Changes
P
1. Press
from the Level screen.
2. From the Program screen, press
as necessary to cycle to the active
underlined ( _ ) program.
3. With the program highlighted, press q to
save changes.
4. The Remote Control then prompts for a
confirmation to save the operation.
Restore Programs
1. From the Level screen, press and hold
to access the Restore screen.
P
2. Press
the program you want to restore, then
press p to restore the program.
NOTE: This will restore the selected
programs to the most recent clinic
settings.
Maintenance
The Trial Stimulator and Remote Control may
be cleaned with a cloth lightly dampened with
water or a mild household cleaner. Do not
use abrasive cleansers on the devices, and
do not sterilize them.
P
Maintenance
again as necessary to highlight
Physician Trial Kit Insert
90877412-04 REV A 5 of 94
P
5

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Sc-5112Sc-5213

Table des Matières