Boston Scientific Precision SCS Mode D'emploi page 6

Precision™ SCS System with MultiWave Technology Physician Trial Kit
2. To increase or decrease the stimulation
level of all programmed therapy areas,
press either p or q from the Level
screen.
3. To change the stimulation level of just
one area:
Note: Only applicable if the Stimulator is
programmed to treat more than one
area and to operate at frequencies of
1,200Hz or below.
a) From the Level screen, press
many times as necessary to find the
desired area by name or number.
b) Press p or q to make the change.
Physician Trial Kit Insert
4
90877412-04 REV A 4 of 94
4. To activate a stimulation program:
a) Press
b) From the Program screen press
many times as necessary to highlight
the desired program.
c) Press p to activate the selected
program.
as
"
To save the new setting in a program,
return to the Program screen, select the
intended program number, and press q.
This will replace the existing program with
the new settings.
Accessing Patient Options
Note: Only applicable if the Stimulator is
programmed to operate at frequencies
of 1,200Hz or below and patient
options are made available.
P
from the Level screen.
P
as