UFESA PN5000 Mode D'emploi page 20

3
Put the ingredients.
The ingredients must be put into the baking tin the
order specified in the relevant recipe. Examples of
recipes can be found in this instruction manual.
4
Fill in the bulk additive dispenser (optional).
In order to complement the dispenser, lift the lid of
dispenser and pour the optimum amount of additives
(fruit, nuts, raisins, beans). The quantity of additives
depends on individual preferences. Then close the lid
until you hear a click.
5
Plug in the appliance.
6
Select the desired program using the menu
button.
The menu button is used to select the programs
described below.
(basic)
For white, wheat and rye bread. This is the most
commonly used program.
(french)
For the preparation of a particularly light white bread.
(whole wheat)
For whole meal bread.
(sweet)
For preparing e.g. sweet leavened dough.
(super)
(gluten free)
For making gluten free bread.
(dough)
For making dough.
(pasta dough)
(jam)
(bake)
To brown bread or cakes.
(baguette)
7
Select the weight appropriate for the given program.
carga button is used to set the weight of the bread (see
table):
500 g = for small bread up to 500 g
750 g = for medium bread up to 750 g
1000 g = for large bread up to 1000 g
8
Select the desired browning level.
The dorado button is used to set the desired browning
level. claro (light), medio (medium), tostado (dark),
rápido (rapid).
9
Set the program start time by means of timer
program selector buttons.
Example:
It is 8.30 p.m. and the bread must be ready for the
next morning by 7.00 a.m., i.e, in 10 hours and 30
minutes. Press the TIME button until the symbol 10.30
appears on Press the program selector buttons, until
you see 10:30 on the LCD - it is the time from now
(20:30) to the moment, when the bread is ready. When
working with the timing function never use perishable
ingredients such as milk, eggs, fruits, yogurt, onions, etc.
10
Press the start/stop button.
After pressing the start/stop button you
can turn off the sound. In order to do this
press and hold both of the timer buttons
for approx. 2 seconds. if you press and hold
both of the timer buttons for a second time, you
will hear a sound signal informing that sound is
on again.
The start/stop button is also used to stop the program
at any time. In order to do so, press and hold the start/
stop button for about 3 seconds until you hear a beep.
The initial position of the selected program will show
on the display. If you want to use a different program,
select the program using the menu button.
11
Mix and knead the dough.
The bread baking machine mixes and kneads
the dough automatically until it reaches the right
consistency.
During the phase of stirring and kneading
of dough, the lid of the appliance should
be closed. During this phase it is possible
to add small amounts of water, liquid or other
ingredients.