Switching On And Setting The Time - Pando PHTV-942 Manuel D'utilisation

INOXPAN S.L.

3. SWITCHING ON AND SETTING THE TIME

When plugging the oven in for the first time, the logo will appear followed by 12:00 flashing on the
screen.
You must set the time in order to use the oven.
To do this select the hour with the left control and the minutes with the right one.
Confirm the settings by pressing the
Confirm the time appearance (standard/retro/ hide the clock) by pressing the
few seconds.
An audible signal will be heard confirming that the time has been set on the screen.
To change the time:
With the oven in standby (start screen), hold the
previous steps to change the time.
WARNING
The sensitivity of the touch keys adapts continually to environmental conditions.
Make sure the surface of the control panel is clean and free of obstacles when plugging in the
oven.
If the display does not respond correctly when you touch the keys, unplug the oven for a few
seconds and then plug it in again. Doing this causes the sensors to adjust automatically so that
they will react once more to fingertip control.
button or waiting a few seconds.
button until the time begins to flash. Follow the
EN - 6
button or waiting a