GB
D
•
Attach the Click&Paint adapter (Fig. 18, 2) with the bayonet coupling to the thinner end
of the air hose (1).
•
Insert the other end of the adapter into the gun handle (3).
•
Set the multifunction switch (fi g. 19, A) to "ON".
1
21. Setting the spray pattern you require when working
with the spray attachment
WARNING! Danger of injury! Never pull the trigger guard while adjusting
the air cap.
With the union nut (fi g. 20, 1) slightly unscrewed, turn the air cap (2) to the desired
spraysetting position (arrow). Then tighten the union nut.
Fig. 21 A = vertical fl at jet
Fig. 21 B = horizontal fl at jet
Fig. 21 C = circular jet
50
50
3
2
for horizontal surfaces
for vertical surfaces
for corners, edges and hard-to-reach surfaces
1
2
W 950 Flexio
W 950 Flexio
A