Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
GB
bEfoRE You bEGIN
cAuTIoN:
You should only use the Handi-Roller 550 for diluted liquids and dilutable
paints, such as water soluble, latex and acrylic paints, as not all components
are solvent resistant. To ensure as long a useful life as possible of your Handi-
Roller 550, it should be thoroughly cleaned immediately after each use.
pREpARING THE WoRKpLAcE ANd THE pAINT
•
Before beginning work, cover or tape up the floor, furniture, door frames and other
objects.
•
Place the unit on a sufficiently sized piece of plastic or cardboard.
•
Stir the paint well and thin up to 10 % if necessary (observe information from
manufacturer).
SETup
1.
Assemble roller cover, core and cap.
2.
Attach assembly to the roller arm, making sure the roller assembly snaps into the
locking tab (a).
3.
Press the quick-release tabs on the unit (a) and attach the arm to the handle (b).
4.
Slide the large end of the fill tube through the can clip.
5.
Attach the clip to the side of the paint can, making sure that the fill tube is submerged
into the paint.
fILLING THE HANdI-RoLLER 550
6.
Turn the switch on the main handle to
7.
Press down and firmly hold the fill valve of the main tube onto the fill tube. Pull the
plunger to draw the paint into the main tube.
pRIMING THE HANdI-RoLLER 550
8.
Leave switch on
through the roller cover.
9. Once paint appears, flip switch to AppLY and begin rolling. Squeeze Power Trigger®
for additional paint as needed.
do not oversaturate the roller. Refill Handi-Roller 550 as necessary to complete
project. during extended break periods, wrap your roller cover in a plastic bag to
keep it from drying out.
6
All manuals and user guides at all-guides.com
fILL and push plunger tube forward until you see paint coming
fILL.
HandiRoller 550
Publicité
Table des Matières
