TOHATSU MFS 15E Manuel De L'utilisateur page 70

68
INSPECTION AND MAINTENANCE
ENOM00088-A
Anode replacement
A sacrificial anode protects the outboard motor from electrolytic corrosion. Anode is
located on the gear case, cylinder etc.. When the anode is eroded more than 1/3 of origi-
nal size, replace it.
ENON00029-A
Notes
Never grease or paint the anode.
At each inspection re-tighten the anode attaching bolt. As it is likely to be subjected to electrolytic
corrosion.
Because the anti-corrosion effect decreases, be sure to correctly install the anode and each
ground lead to be connected to the bracket when the anode is replaced.
10
*1 : PTT model
*2 : Manual tilt model
*1
*2
ENOF01231-1