TOHATSU MFS 15E Manuel De L'utilisateur page 26

Masquer les pouces Voir aussi pour MFS 15E:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

24
INSTALLATION
ing, the electrical parts could be dam-
aged.
Always use a fully charged battery.
ENOW00015-0
Do not use a battery that is not recom-
mended. Use of a battery not recom-
mended can lead to poor performance of,
and/or damage to, the electrical system.
ENON00006-A
Note
5
Recommended battery: 12V 40Ah/5HR,
350 (Cold Cranking Amps (CCA), In case of
cold whether: 12V70Ah/5HR (650CCA))
Specifications and features of batteries vary
among the manufacturers. Consult the
manufacturer for details.
* The battery should be purchased sepa-
rately and is not supplied with the outboard
motor.
1. Place the battery box in a convenient
position away from possible water
spray. Securely fasten both the box
and the battery so they do not shake
loose.
2. Connect the positive lead (+) to the
positive terminal (+) of the battery, and
then connect the negative lead (—).
W h e n d i s c o n n e c t i n g t h e b a t t e r y
always remove the negative lead (—)
first. After connecting the positive ter-
minal (+), securely place a cap on it to
prevent short circuits.
CAUTION
1
1. Battery cord (red)
2. Battery cord (black)
2
ENOF00022-0

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Mfs 9.9eMfs 20e

Table des Matières