Periodic Inspection - TOHATSU MFS 15E Manuel De L'utilisateur

ENOM00090-B

2. Periodic Inspection

It is important to inspect and maintain your outboard motor regularly. At each interval on
the chart below, be sure to perform the indicated servicing.
Maintenance intervals should be determined according to the number of hours or number
of months, whichever comes first.
Description
Fuel filter
High pressure fuel
hose*1
Fuel filter
(Vapor separator)*1
Fuel
Fuel tank
System
Fuel tank cap
Fuel pump*1
Fuel pressure*1
Hose*2
Spark plug
Ignition
System
Spark plug cap
/High tension cord*1
Starter rope*2
Starting Starter motor*1
System
Battery
/Cable connection*1
Engine oil
Oil filter (4 stroke)*1
Oil strainer*1
Valve clearance*1
Engine
Timing belt*1
Idling speed*1
Compression
pressure*1
Combustion
chamber*1
Thermostat*1
Propeller
Shear pin/Split pin
Gear oil
Lower Unit
Water strainer
Water pump
impeller*2
Water pump
housing*1
Inspection intervals
First 20 Every 50 Every 100 Every 200 Every 400
hours or hours or hours or hours or
1 month 3 months 6 months 1 year
/
/ /
/ /
/ /
/ /
/ /
Replace Replace
Replace
/ /
Replace Replace
/
Replace
INSPECTION AND MAINTENANCE
Inspection procedure
hours or
2 year
Check and clean/Replace if necessary
Check/Replace if necessary
Check, clean or replace if necessary
Check and clean
Check /Replace if necessary
Check /Replace if necessary
Check
Check /Replace if necessary
Check and clean/Replace if necessary
Check /Replace if necessary
Check /Replace if necessary
Check
Check
Replace
Replace (Every 200 hours or 2 years)
Check and clean
Check and adjustment
Check and replace if necessary
Check
Check
Check
Check
Check and replace if necessary
Check and replace if necessary
Check and replace
Check
Check/Replace if necessary
Check and replace if necessary
59
Remarks
Refer to P62
Gap
(0.80-0.9mm)
Refer to P66
Approx.1.0L
Oil filter replace 1.2L
Refer to P60
10
IN : 0.13-0.17mm
EX : 0.18-0.22mm
Refer to P65
Refer to P65
Approx. 465ml
Refer to P64