Data And Time Setting Of The System - Teuco ARJA Manuel De L'utilisateur

EN
DATA AND TIME SETTING OF THE
SYSTEM
With the keypad in "READY" mode, press and keep
pressed the key
time setting mode. In this mode, the key
comes blinking white 1"ON/1"OFF. The editable
value is visualized in negative and can be modified
by means of keys
and , you move from a value to another.
In the example the day change is carried out.
Pressing of key
makes set changes effective and causes the exit
from time/date setting mode.
When keys and
not pressed for 5", you enter the date setting mode
returning to "READY" mode.
Before the user confirms at least once with
, in reset, time and data are always in
the format 01-01-2013 00:00.
32
for 1.5" to enter the date and
be-
and ; by means of key
during modification phase
, and are
1,5sec.