Teuco ARJA Manuel De L'utilisateur page 20

EN
The set-point temperature and humidity values can
be modified using the
time.
When one of the
the temperature digits are replaced with the set-
point value in negative to indicate access to "set-
point modification" mode; press the key again to
change the values.
After 3" of inactivity of the
you quit "set-point modification" mode, the tempera-
ture goes back to being displayed but not in nega-
tive and the new set-point temperature value be-
comes operational.
The same procedure must be carried out to modify
the humidity set-point, after selecting it using the
and keys.
When the temperature set-point value chang-
es, the system changes the humidity value
automatically, and vice versa, in order to
maintain usage conditions that do not jeop-
ardise the health of the product user.
Thresholds of temperature and humidity setting are
as follows:
TEMPERATURE
45°C
50°C
55°C
60°C
110°C
HUMIDITY
30%
40%
50%
60%
100%
20
and keys at any
or , keys are pressed,
and , keys,
MAX HUMIDITY
SETTABLE
100%
60%
50%
40%
30%
MAX.
SETTABLE
TEMPERATURE
110°C
60°C
55°C
50°C
45°C
3sec.