Pulsator Mode/Speed Selection Function Of The Hydromassage - Teuco HYDROLINE Hydrosilence T50 Manuel De L'utilisateur

EN
PULSATOR MODE/SPEED
SELECTION FUNCTION OF THE
HYDROMASSAGE
Normally, the hydromassage of the Hydroline series
offers a timing variation of the massage power. At 5
second intervals, the power is gradually increased
and reduced between the minimum and maximum
value, creating a pleasing massaging effect.
- In this functioning mode, the HYDRO key on
the control panel is ON at high intensity and the
SANIFICATION key flashes from high intensity to
low intensity at low frequency.
- If a constant hydromassage power is preferred,
press the SANIFICATION key in the moment in
which the required hydromassage power is being
supplied.
- The SANIFICATION key remains ON at low
intensity and the supply remains fixed at the
required speed.
- To reset the Pulsator functioning mode, press the
SANIFICATION key.
- The SANIFICATION key flashes again at low
frequency from low intensity to high intensity.
10
HYDROLINE