Teuco ARJA Manuel De L'utilisateur page 26

EN
The set-point temperature can be modified using the
and keys at any time.
When one of the or , keys are pressed,
the temperature digits are replaced with the set-
point value in negative to indicate access to "set-
point modification" mode; press the key again to
change the values.
After 3" of inactivity of the and , keys,
you quit "set-point modification" mode, the tempera-
ture goes back to being displayed but not in nega-
tive and the new set-point temperature value be-
comes operational.
Example: set-point modification screens.
3sec.
26