Inactive Bio-Sauna; Bio-Sauna Configuration In Manual Mode - Teuco ARJA Manuel De L'utilisateur

INACTIVE BIO-SAUNA

When the keypad is in "READY" or "FUNC. ON"
mode and the sauna is not operating, the LED as-
sociated with the SAUNA key
high intensity, whereas if a sauna was programmed
the LED blinks in WHITE/BLUE (1"ON 1"OFF)
slowly.
When pressing the SAUNA key
• The LED associated with the SAUNA key blinks
more quickly in WHITE/BLUE (0.5"ON, 0.5"OFF)
to indicate the modification is in progress.
BIO-SAUNA CONFIGURATION IN MANUAL
MODE
In this state, it is possible to carry out the following
actions:
• to activate the MANUAL sauna with the values
set (by pressing
• to select and modify the values set and the du-
ration of the MANUAL sauna;
The display shows the following data:
• the temperature of the last sauna in negative, to
indicate the possibility of modification;
• the humidity of the last sauna;
• duration (max. 6 hours) in the "h:mm" format;
• the MAN and AUTO modes with the "MAN" word
underlined to indicate its selection.
Selection
Through the keys and
moved to one of the four possible fields:
• temperature set-point;
• humidity setting;
• duration in hours;
• duration in minutes;
• auto.
The selection of parameters is indicated by visual-
izing the characters in negative (black on white).
When the selection reaches AUTO, the blinking
dash moves from "Man" to "Auto".
Example of selection through the key
same manner, in reverse order, through
is lit in white at
;
).
, the selection is
; in the
.
EN
21