Basic Safety Instructions - Burkert 2100 Manuel D'utilisation

Basic safety instructions

3. Basic saFeTy insTrucTiOns
These safety instructions do not make allowance for any
• contingencies and events which may arise during the installation,
operation and maintenance of the devices.
• local safety regulations, whereby the operator is responsible for their
compliance, by the installation personnel too.
DAnger!
danger – high pressure!
• Before dismounting the lines and valves, turn off the pressure
and vent the lines.
risk of electric shock!
• Before reaching into the device, switch off the power supply
and secure to prevent reactivation!
• Observe applicable accident prevention and safety regulations
for electrical equipment!
wArning!
risk of injury when opening the actuator body!
The actuator contains a tensioned spring. If the actuator body is
opened, there is a risk of injury from the spring jumping out!
• The actuator body must not be opened.
Type 2100
CAuTion!
risk of burns!
The surface of the device may become hot during long-term
operation.
• Do not touch the device with bare hands.
wArning!
general hazardous situations.
To prevent injury, ensure:
• that the system cannot be activated unintentionally.
• Installation and repair work may be carried out by authorized
technicians only and with the appropriate tools.
• After an interruption in the power supply or pneumatic supply,
ensure that the process is restarted in a defined or controlled
manner.
• The device may be operated only when in perfect condition and
in consideration of the operating instructions.
• The general rules of technology apply to application planning
and operation of the device.
The angle seat valve type 2100 was developed with due
consideration given to the accepted safety rules and is state-
of-the-art. Nevertheless, dangerous situations may occur.
english
7