Basic Safety Instructions - Burkert 2000 Mode D'emploi

3 BASIC SAFETY
INSTRUCTIONS
These safety instructions do not take into account any unfore-
seen circumstances and events which occur during installation,
operation and maintenance.
The operator is responsible for observing the location-specific
safety regulations, also with reference to the personnel.
DANGER!
Risk of injury from high pressure and discharge of medium.
▶ Before working on the device or system, switch off the pres-
sure. Vent or drain lines.
DANGER!
Electric shock due to installed electrical component.
▶ Before working on the device or system, switch off the power
supply. Secure against reactivation.
▶ Observe the applicable accident prevention and safety regula-
tions for electrical devices.
WARNING!
Risk of injury when opening the actuator.
The actuator contains a spring under tension. When the actuator
is opened, the spring will jump out and may cause injuries.
▶ Do not open the actuator.
6 english
Type 2000

Basic safety instructions

WARNING!
Risk of injury due to moving parts.
▶ Do not reach into openings in the device.
WARNING!
Danger of burns and risk of fire.
Quickly switching actuators or hot medium may cause the sur-
face of the device to become hot.
▶ Only touch the device while wearing protective gloves.
▶ Keep the device away from highly flammable substances and
media.
WARNING!
Danger due to loud noises.
Depending on the usage conditions, the device may generate
loud noises. Detailed information on the probability of loud
noises is available from the respective sales department.
▶ Wear hearing protection when in the vicinity of the device.
WARNING!
Discharge of medium if packing gland worn.
▶ If media are hazardous, safeguard the environment around the
discharge point.