Basic Safety Instructions - Burkert 2000 Mode D'emploi

2 BASIC SAFETY INSTRUCTIONS
These safety instructions do not make allowance for any
• contingencies and events which may arise during the installation, operation and maintenance of the devices.
• local safety regulations; the operator is responsible for observing these regulations, also with reference to the
installation personnel.
Danger – high pressure!
▶ Before loosening the lines and valves, turn off the pressure and vent the lines.
Risk of electric shock!
▶ Before reaching into the device or the equipment, switch off the power supply and secure to prevent
reactivation!
▶ Observe applicable accident prevention and safety regulations for electrical equipment!
Risk of burns/risk of fire if used continuously through hot device surface!
▶ Keep the device away from highly flammable substances and media and do not touch with bare hands.
General hazardous situations.
▶ The system cannot be activated unintentionally.
▶ Installation and repair work may be carried out by authorized technicians only and with the appropriate tools.
▶ After an interruption in the power supply or pneumatic supply, ensure that the process is restarted in a
defined or controlled manner.
▶ The device may be operated only when in perfect condition and in consideration of the operating instructions.
▶ The general rules of technology apply to application planning and operation of the device.
6
english
Type 2000, 2002, 2012
Basicsafetyinstructions