Electromagnetic Immunity - Medela Invia Motion Mode D'emploi

Electromagnetic compatibility
( EMC, IEC 60601-1-2:2014 4th Edition, Table 2 )

Electromagnetic immunity

The Invia Motion pump is intended for use in the electromagnetic environment
specified below. The customer or the user of the Invia Motion pump should assure that it is used in such
environment.
Immunity tests IEC 60601
test level
Electrostatic ± 8 kV contact
Discharge (ESD) ± 15 kV air
IEC 61000-4-2
Electrical fast ± 2 kV
transient/burst for power
IEC 61000-4-4 supply lines
± 1 kV
for input /
output lines
Surge ± 1 kV differen -tial
IEC 61000-4-5 mode
± 2 kV line-to-earth
0 % U
Voltage dips,
short interrup- for 0.5 cycle at
tions and voltage
0°, 45°, 90°, 135°,
variations on
180°, 225°, 270°
power supply
and 315°
input lines
0 % U
IEC 61000-4-11
for 1 cycle
70 % U
for 25 cycles at
50 Hz
Single phase: at 0°
0 % U
for 250 cycles at
50 Hz
Power frequency 30 A/m
(50/60 Hz)
magnetic field
IEC 61000-4-8
NOTE: U
is the a.c. mains voltage prior to application of the test level.
T
32
Compliance
level
± 8 kV contact
± 15 kV air
± 2 kV for power
supply lines
± 1 kV for input /
output lines
not applicable
± 1 kV differen-tial
mode
± 2 kV line-to-earth
not applicable
0 % U
T T
for 0.5 cycle at
0°, 45°, 90°, 135°,
180°, 225°, 270°
and 315°
0 % U
T T
for 1 cycle
70 % U
T T
for 25 cycles at
50 Hz
Single phase: at 0°
0 % U
T T
for 250 cycles at
50 Hz
30 A/m
Electromagnetic environment –
guidance
The Invia Motion NPWT system is suitable
for use in all establishments, including do-
mestic establishments and those directly
connected to the public low-voltage power
supply network that supplies buildings
used for domestic purposes.
The Invia Motion NPWT system is suitable
for use in all establishments, including do-
mestic establishments and those directly
connected to the public low-voltage power
supply network that supplies buildings
used for domestic purposes.
The Invia Motion NPWT system is suitable
for use in all establishments, including do-
mestic establishments and those directly
connected to the public low-voltage power
supply network that supplies buildings
used for domestic purposes.
The Invia Motion NPWT system is suitable
for use in all establishments, including
domestic establishments and those
directly connected to the public low-volt-
age power supply network that supplies
buildings used for domestic purposes. If
the user of the Invia Motion pump requires
continued operation during power mains
interruptions, it is recommended that the
Invia Motion pump be powered from an
uninterruptible power supply or a battery.
The Invia Motion NPWT system is suitable
for use in all establishments, including do-
mestic establishments and those directly
connected to the public low-voltage power
supply network that supplies buildings
used for domestic purposes.