Once Bright Agc Parameters Menu; Information Agc Parameters Menu; Isotherm Menu - Videotec MAXIMUS MVXT Manuel D'instructions

6.1.4.13 Once Bright AGC parameters menu

AGC mode settings: Once Bright.
It allows you to configure the following parameters:
Brightness Bias: Sets the brightness
1.
compensation.
Contrast: Sets the image contrast level.
2.
IIR filter: Sets the IIR filter coefficient. The filter
3.
is used to define the speed with which AGC
reacts to variations in the scene.
PARAM. ONCE BRIGHT AGC. PARAM. ONCE BRIGHT AGC.
------------------------ ------------------------
1 BRIGHTNESS BIAS: 1 BRIGHTNESS BIAS:
2 CONTRAST 2 CONTRAST
3 IIR FILTER 3 IIR FILTER
Fig. 34

6.1.4.14 Information AGC parameters menu

AGC mode settings: Information based and
Information-based equalization.
It allows you to configure the following parameters:
Info Threshold: Defines the difference
1.
between close pixels used to determine
whether or not the image contains information.
PARAM. AGC INFORMATION PARAM. AGC INFORMATION
------------------------ ------------------------
1 INFO THRESHOLD : 1 INFO THRESHOLD :
Fig. 35
24
+0 +0
: : 32 32
: : 0 0
0 0

6.1.4.15 Isotherm menu

Using the Isotherm menu it is possible to enable a
special colour for objects included within the set
temperature range.
It allows you to configure the following parameters:
1. Enable: Enables the Isotherm function.
2. Mode: Selects the range display mode (in
percentages or degrees Celsius).
3. Upper: Sets the upper limit of the Isotherm
function.
4. Central: Sets the intermediate limit of the
Isotherm function.
5. Lower: Sets the lower limit of the Isotherm
function.
ISOTHERM ISOTHERM
------------------------ ------------------------
1>ENABLES 1>ENABLES
2 MODE 2 MODE
3 UPPER 3 UPPER
4 CENTRAL 4 CENTRAL
5 LOWER 5 LOWER
Fig. 36
The menu dynamically auto-configures based on the
camera installed and the choice made, showing the
parameters on which you can act.
: : N N
: : PERCENT PERCENT
: : 95 95
: : 92 92
: : 90 90
MNVCMVXTCAM_2121_EN